🎉 Up to 70% Off Selected ItemsShop Sale
KBDFans Tiger Lite Gaming Tofix 8K Barebones TKL DIY Keyboard Kit
- ABS case with silicone gasket structure
- 1.6mm non flex-cut Hotswap PCB
- 8K polling rate
- Programmable using Tofix firmware and VIA
- Per-key RGB backlighting
- Looking for a magnetic switch version? Try the Tiger Lite Gaming Kit with Venom HE PCB
- DIY kit - assembly is required
- All US import tariffs are prepaid by MK and already included in the price. For more info, please see our FAQ.
Includes:
- PC or FR4 plate
- Tofix 8K RGB PCB
- USB daughterboard
- ABS case
- 3.5mm plate foam
- 0.1mm PET switch pad
- 1* silicone sock set
- 1* Cherry stabilizer kit
- USB-C cable
- 1* set of rubber feet
- carrying case
- T6 screwdriver
Case Injection Molding Optimization and Cracking Notice:
The R1 version of the transparent case featured multiple injection molding gates, affecting its aesthetic appearance. The R2 version incorporates mold optimization, relocating some injection gates to the side to improve the overall look. However, due to the ultra-thin bezel design, the injection gate area may be susceptible to cracking if pressed without the case being fully assembled. This is a normal characteristic of plastic materials and consistent with results from similar product testing.
Once fully assembled, the mounting plate provides support to prevent cracking. All products undergo rigorous inspection before shipment and are free from cracking issues, meeting our quality standards.
Upon receiving your product, please inspect it immediately (visually only, do not press on the injection gate area during inspection). Cracking caused by user handling will not be covered under warranty.
- PC or FR4 plate
- Tofix 8K RGB PCB
- USB daughterboard
- ABS case
- 3.5mm plate foam
- 0.1mm PET switch pad
- 1* silicone sock set
- 1* Cherry stabilizer kit
- USB-C cable
- 1* set of rubber feet
- carrying case
- T6 screwdriver
Case Injection Molding Optimization and Cracking Notice:
The R1 version of the transparent case featured multiple injection molding gates, affecting its aesthetic appearance. The R2 version incorporates mold optimization, relocating some injection gates to the side to improve the overall look. However, due to the ultra-thin bezel design, the injection gate area may be susceptible to cracking if pressed without the case being fully assembled. This is a normal characteristic of plastic materials and consistent with results from similar product testing.
Once fully assembled, the mounting plate provides support to prevent cracking. All products undergo rigorous inspection before shipment and are free from cracking issues, meeting our quality standards.
Upon receiving your product, please inspect it immediately (visually only, do not press on the injection gate area during inspection). Cracking caused by user handling will not be covered under warranty.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
KBDFans Tiger Lite Gaming Tofix 8K Barebones TKL DIY Keyboard Kit
KBDFans Tiger Lite Gaming Tofix 8K Barebones TKL DIY Keyboard Kit
- ABS case with silicone gasket structure
- 1.6mm non flex-cut Hotswap PCB
- 8K polling rate
- Programmable using Tofix firmware and VIA
- Per-key RGB backlighting
- Looking for a magnetic switch version? Try the Tiger Lite Gaming Kit with Venom HE PCB
- DIY kit - assembly is required
- All US import tariffs are prepaid by MK and already included in the price. For more info, please see our FAQ.
Includes:
- PC or FR4 plate
- Tofix 8K RGB PCB
- USB daughterboard
- ABS case
- 3.5mm plate foam
- 0.1mm PET switch pad
- 1* silicone sock set
- 1* Cherry stabilizer kit
- USB-C cable
- 1* set of rubber feet
- carrying case
- T6 screwdriver
Case Injection Molding Optimization and Cracking Notice:
The R1 version of the transparent case featured multiple injection molding gates, affecting its aesthetic appearance. The R2 version incorporates mold optimization, relocating some injection gates to the side to improve the overall look. However, due to the ultra-thin bezel design, the injection gate area may be susceptible to cracking if pressed without the case being fully assembled. This is a normal characteristic of plastic materials and consistent with results from similar product testing.
Once fully assembled, the mounting plate provides support to prevent cracking. All products undergo rigorous inspection before shipment and are free from cracking issues, meeting our quality standards.
Upon receiving your product, please inspect it immediately (visually only, do not press on the injection gate area during inspection). Cracking caused by user handling will not be covered under warranty.
- PC or FR4 plate
- Tofix 8K RGB PCB
- USB daughterboard
- ABS case
- 3.5mm plate foam
- 0.1mm PET switch pad
- 1* silicone sock set
- 1* Cherry stabilizer kit
- USB-C cable
- 1* set of rubber feet
- carrying case
- T6 screwdriver
Case Injection Molding Optimization and Cracking Notice:
The R1 version of the transparent case featured multiple injection molding gates, affecting its aesthetic appearance. The R2 version incorporates mold optimization, relocating some injection gates to the side to improve the overall look. However, due to the ultra-thin bezel design, the injection gate area may be susceptible to cracking if pressed without the case being fully assembled. This is a normal characteristic of plastic materials and consistent with results from similar product testing.
Once fully assembled, the mounting plate provides support to prevent cracking. All products undergo rigorous inspection before shipment and are free from cracking issues, meeting our quality standards.
Upon receiving your product, please inspect it immediately (visually only, do not press on the injection gate area during inspection). Cracking caused by user handling will not be covered under warranty.
Select Color
Select Plate Material
From $26.25
Original: $75.00
-65%KBDFans Tiger Lite Gaming Tofix 8K Barebones TKL DIY Keyboard Kit—
$75.00
$26.25Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
- ABS case with silicone gasket structure
- 1.6mm non flex-cut Hotswap PCB
- 8K polling rate
- Programmable using Tofix firmware and VIA
- Per-key RGB backlighting
- Looking for a magnetic switch version? Try the Tiger Lite Gaming Kit with Venom HE PCB
- DIY kit - assembly is required
- All US import tariffs are prepaid by MK and already included in the price. For more info, please see our FAQ.
Includes:
- PC or FR4 plate
- Tofix 8K RGB PCB
- USB daughterboard
- ABS case
- 3.5mm plate foam
- 0.1mm PET switch pad
- 1* silicone sock set
- 1* Cherry stabilizer kit
- USB-C cable
- 1* set of rubber feet
- carrying case
- T6 screwdriver
Case Injection Molding Optimization and Cracking Notice:
The R1 version of the transparent case featured multiple injection molding gates, affecting its aesthetic appearance. The R2 version incorporates mold optimization, relocating some injection gates to the side to improve the overall look. However, due to the ultra-thin bezel design, the injection gate area may be susceptible to cracking if pressed without the case being fully assembled. This is a normal characteristic of plastic materials and consistent with results from similar product testing.
Once fully assembled, the mounting plate provides support to prevent cracking. All products undergo rigorous inspection before shipment and are free from cracking issues, meeting our quality standards.
Upon receiving your product, please inspect it immediately (visually only, do not press on the injection gate area during inspection). Cracking caused by user handling will not be covered under warranty.
- PC or FR4 plate
- Tofix 8K RGB PCB
- USB daughterboard
- ABS case
- 3.5mm plate foam
- 0.1mm PET switch pad
- 1* silicone sock set
- 1* Cherry stabilizer kit
- USB-C cable
- 1* set of rubber feet
- carrying case
- T6 screwdriver
Case Injection Molding Optimization and Cracking Notice:
The R1 version of the transparent case featured multiple injection molding gates, affecting its aesthetic appearance. The R2 version incorporates mold optimization, relocating some injection gates to the side to improve the overall look. However, due to the ultra-thin bezel design, the injection gate area may be susceptible to cracking if pressed without the case being fully assembled. This is a normal characteristic of plastic materials and consistent with results from similar product testing.
Once fully assembled, the mounting plate provides support to prevent cracking. All products undergo rigorous inspection before shipment and are free from cracking issues, meeting our quality standards.
Upon receiving your product, please inspect it immediately (visually only, do not press on the injection gate area during inspection). Cracking caused by user handling will not be covered under warranty.
