đ Up to 70% Off Selected ItemsShop Sale
Wooting 80HE TenZ Takeover 75% Keyboard
- Gasket mount design with black FR4 plate
- Solid black top and bottom plastic case with dark translucent sides
- Lekker TenZ TikkenZ magnetic Hall effect switches
- Adjustable actuation point from 0.1mm - 4.0mm
- Rapid Trigger allows a switch to reset without surpassing a fixed reset point
- Rappy Snappy monitors at least 2 selected keys and activates the key pressed the furthest
- 8K polling rate with 0.125ms latency
- LED bar can be used for indicator lights or ambient effect (can be turned off using Wootility app)
- PCB mount screw-in stabilizers
- North facing per-key RGB with 4 LEDs under the spacebar
- Sound absorbing layers include EPDM foam, PET film "tape mod", and silicone sandwich pad
- Compatible with Gateron KS-20, Gateron Magnetic Jade, or Lekker switches
- Custom Dye Sub keycaps with white English legends and red Kana sublegends
- Use Wootility to program RGB, actuation point, and profiles and save changes to the board itself
- Foam-filled spacebar and super-lubed stabilizers
- Comes preloaded with TenZ's exact Wootility configuration
Includes:
- red switch and keycap puller
- 3 spare Lekker TenZ TikkenZ switches
- black and red braided nylon USB-C to USB-C cable
- USB-C to USB-A dongle
- 2* black 6° feet
- 2* black 10° feet
- 4* M2x5 spare screws
- additional keycaps
- TenZ postcard
The Wooting 80HE keyboard uses Lekker TenZ TikkenZ switches with rapid trigger capability. These switches use magnets and sensors instead of physical contacts to process actuations, creating a much smoother keypress without bounce or chatter. The adjustable actuation point is determined not by location but by distance travelled
Lekker TenZ TikkenZ switch
- customized, lighter version of the Lekker Tikken switch
- linear
- adjustable actuation point from 0.1-4.0mm
- silent
- MX stem
- 100 million keypress lifetime
The Wooting 80HE TenZ Takeover is built in collaboration with TenZ, who has used Wooting keyboards throughout most of his pro career and has been a long-time supporter of the brand. This keyboard features a black and red aesthetic, custom switches with a lighter spring, a black FR4 plate, black silicone feet, and double-shot PBT keycaps with white and red legends for a clean finish. The keyboard comes pre-loaded with TenZâs preferred configuration. This is a limited run of 20,000 units. 100 units in this run were signed by TenZ himself and will be randomly distributed.
- red switch and keycap puller
- 3 spare Lekker TenZ TikkenZ switches
- black and red braided nylon USB-C to USB-C cable
- USB-C to USB-A dongle
- 2* black 6° feet
- 2* black 10° feet
- 4* M2x5 spare screws
- additional keycaps
- TenZ postcard
The Wooting 80HE keyboard uses Lekker TenZ TikkenZ switches with rapid trigger capability. These switches use magnets and sensors instead of physical contacts to process actuations, creating a much smoother keypress without bounce or chatter. The adjustable actuation point is determined not by location but by distance travelled
Lekker TenZ TikkenZ switch
- customized, lighter version of the Lekker Tikken switch
- linear
- adjustable actuation point from 0.1-4.0mm
- silent
- MX stem
- 100 million keypress lifetime
The Wooting 80HE TenZ Takeover is built in collaboration with TenZ, who has used Wooting keyboards throughout most of his pro career and has been a long-time supporter of the brand. This keyboard features a black and red aesthetic, custom switches with a lighter spring, a black FR4 plate, black silicone feet, and double-shot PBT keycaps with white and red legends for a clean finish. The keyboard comes pre-loaded with TenZâs preferred configuration. This is a limited run of 20,000 units. 100 units in this run were signed by TenZ himself and will be randomly distributed.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Wooting 80HE TenZ Takeover 75% Keyboard
Wooting 80HE TenZ Takeover 75% Keyboard
- Gasket mount design with black FR4 plate
- Solid black top and bottom plastic case with dark translucent sides
- Lekker TenZ TikkenZ magnetic Hall effect switches
- Adjustable actuation point from 0.1mm - 4.0mm
- Rapid Trigger allows a switch to reset without surpassing a fixed reset point
- Rappy Snappy monitors at least 2 selected keys and activates the key pressed the furthest
- 8K polling rate with 0.125ms latency
- LED bar can be used for indicator lights or ambient effect (can be turned off using Wootility app)
- PCB mount screw-in stabilizers
- North facing per-key RGB with 4 LEDs under the spacebar
- Sound absorbing layers include EPDM foam, PET film "tape mod", and silicone sandwich pad
- Compatible with Gateron KS-20, Gateron Magnetic Jade, or Lekker switches
- Custom Dye Sub keycaps with white English legends and red Kana sublegends
- Use Wootility to program RGB, actuation point, and profiles and save changes to the board itself
- Foam-filled spacebar and super-lubed stabilizers
- Comes preloaded with TenZ's exact Wootility configuration
Includes:
- red switch and keycap puller
- 3 spare Lekker TenZ TikkenZ switches
- black and red braided nylon USB-C to USB-C cable
- USB-C to USB-A dongle
- 2* black 6° feet
- 2* black 10° feet
- 4* M2x5 spare screws
- additional keycaps
- TenZ postcard
The Wooting 80HE keyboard uses Lekker TenZ TikkenZ switches with rapid trigger capability. These switches use magnets and sensors instead of physical contacts to process actuations, creating a much smoother keypress without bounce or chatter. The adjustable actuation point is determined not by location but by distance travelled
Lekker TenZ TikkenZ switch
- customized, lighter version of the Lekker Tikken switch
- linear
- adjustable actuation point from 0.1-4.0mm
- silent
- MX stem
- 100 million keypress lifetime
The Wooting 80HE TenZ Takeover is built in collaboration with TenZ, who has used Wooting keyboards throughout most of his pro career and has been a long-time supporter of the brand. This keyboard features a black and red aesthetic, custom switches with a lighter spring, a black FR4 plate, black silicone feet, and double-shot PBT keycaps with white and red legends for a clean finish. The keyboard comes pre-loaded with TenZâs preferred configuration. This is a limited run of 20,000 units. 100 units in this run were signed by TenZ himself and will be randomly distributed.
- red switch and keycap puller
- 3 spare Lekker TenZ TikkenZ switches
- black and red braided nylon USB-C to USB-C cable
- USB-C to USB-A dongle
- 2* black 6° feet
- 2* black 10° feet
- 4* M2x5 spare screws
- additional keycaps
- TenZ postcard
The Wooting 80HE keyboard uses Lekker TenZ TikkenZ switches with rapid trigger capability. These switches use magnets and sensors instead of physical contacts to process actuations, creating a much smoother keypress without bounce or chatter. The adjustable actuation point is determined not by location but by distance travelled
Lekker TenZ TikkenZ switch
- customized, lighter version of the Lekker Tikken switch
- linear
- adjustable actuation point from 0.1-4.0mm
- silent
- MX stem
- 100 million keypress lifetime
The Wooting 80HE TenZ Takeover is built in collaboration with TenZ, who has used Wooting keyboards throughout most of his pro career and has been a long-time supporter of the brand. This keyboard features a black and red aesthetic, custom switches with a lighter spring, a black FR4 plate, black silicone feet, and double-shot PBT keycaps with white and red legends for a clean finish. The keyboard comes pre-loaded with TenZâs preferred configuration. This is a limited run of 20,000 units. 100 units in this run were signed by TenZ himself and will be randomly distributed.
$80.50
Original: $229.99
-65%Wooting 80HE TenZ Takeover 75% Keyboardâ
$229.99
$80.50Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
- Gasket mount design with black FR4 plate
- Solid black top and bottom plastic case with dark translucent sides
- Lekker TenZ TikkenZ magnetic Hall effect switches
- Adjustable actuation point from 0.1mm - 4.0mm
- Rapid Trigger allows a switch to reset without surpassing a fixed reset point
- Rappy Snappy monitors at least 2 selected keys and activates the key pressed the furthest
- 8K polling rate with 0.125ms latency
- LED bar can be used for indicator lights or ambient effect (can be turned off using Wootility app)
- PCB mount screw-in stabilizers
- North facing per-key RGB with 4 LEDs under the spacebar
- Sound absorbing layers include EPDM foam, PET film "tape mod", and silicone sandwich pad
- Compatible with Gateron KS-20, Gateron Magnetic Jade, or Lekker switches
- Custom Dye Sub keycaps with white English legends and red Kana sublegends
- Use Wootility to program RGB, actuation point, and profiles and save changes to the board itself
- Foam-filled spacebar and super-lubed stabilizers
- Comes preloaded with TenZ's exact Wootility configuration
Includes:
- red switch and keycap puller
- 3 spare Lekker TenZ TikkenZ switches
- black and red braided nylon USB-C to USB-C cable
- USB-C to USB-A dongle
- 2* black 6° feet
- 2* black 10° feet
- 4* M2x5 spare screws
- additional keycaps
- TenZ postcard
The Wooting 80HE keyboard uses Lekker TenZ TikkenZ switches with rapid trigger capability. These switches use magnets and sensors instead of physical contacts to process actuations, creating a much smoother keypress without bounce or chatter. The adjustable actuation point is determined not by location but by distance travelled
Lekker TenZ TikkenZ switch
- customized, lighter version of the Lekker Tikken switch
- linear
- adjustable actuation point from 0.1-4.0mm
- silent
- MX stem
- 100 million keypress lifetime
The Wooting 80HE TenZ Takeover is built in collaboration with TenZ, who has used Wooting keyboards throughout most of his pro career and has been a long-time supporter of the brand. This keyboard features a black and red aesthetic, custom switches with a lighter spring, a black FR4 plate, black silicone feet, and double-shot PBT keycaps with white and red legends for a clean finish. The keyboard comes pre-loaded with TenZâs preferred configuration. This is a limited run of 20,000 units. 100 units in this run were signed by TenZ himself and will be randomly distributed.
- red switch and keycap puller
- 3 spare Lekker TenZ TikkenZ switches
- black and red braided nylon USB-C to USB-C cable
- USB-C to USB-A dongle
- 2* black 6° feet
- 2* black 10° feet
- 4* M2x5 spare screws
- additional keycaps
- TenZ postcard
The Wooting 80HE keyboard uses Lekker TenZ TikkenZ switches with rapid trigger capability. These switches use magnets and sensors instead of physical contacts to process actuations, creating a much smoother keypress without bounce or chatter. The adjustable actuation point is determined not by location but by distance travelled
Lekker TenZ TikkenZ switch
- customized, lighter version of the Lekker Tikken switch
- linear
- adjustable actuation point from 0.1-4.0mm
- silent
- MX stem
- 100 million keypress lifetime
The Wooting 80HE TenZ Takeover is built in collaboration with TenZ, who has used Wooting keyboards throughout most of his pro career and has been a long-time supporter of the brand. This keyboard features a black and red aesthetic, custom switches with a lighter spring, a black FR4 plate, black silicone feet, and double-shot PBT keycaps with white and red legends for a clean finish. The keyboard comes pre-loaded with TenZâs preferred configuration. This is a limited run of 20,000 units. 100 units in this run were signed by TenZ himself and will be randomly distributed.
